www.vishay.com 38 model imc-0603 vishay dale document number 34039 revision 03-sep-99 inductors high frequency, surface mount, laser spiral, coated features ? very small in size. ? high self-resonant frequency values. ? high q values relative to size at higher frequencies. ? coated coil provides protection and moisture resistance. ? compatible with vapor phase and infrared reflow soldering. ? tape and reel packaging for automatic handling, 3000/reel, eia-481. ? l & q value not effected by mounting orientation. standard electrical specifications ind. (nh) tolerance test freq. l & q (mhz) q typical self- resonant freq. min. (mhz) dcr maximum (ohms) rated dc current (ma) q minimum 100 (mhz) 800 (mhz) 1.8 (ghz) how to order *use tolerance % shown in electrical specifications in lieu of 0.3nh on 1.5 - 3.3nh. dimensional configurations electrical specifications inductance range: 1.5nh to 100nh. inductance tolerance: 0.3nh, 1.5nh to 3.3nh. 5%, 3.9nh to 100nh. temperature rating: - 40 c to + 105 c (no load) - 40 c to + 85 c (at full rated current). core material: non-magnetic. test equipment ? inductance and q measured on hp4191a. ? srf measured on hp8753b. 1.5 0.3nh (or 20%) 100 8 18 50 75 6000 0.07 500 1.8 0.3nh (or 16.7%) 100 8 18 48 72 6000 0.08 500 2.2 0.3nh (or 13.6%) 100 8 15 38 55 6000 0.09 500 2.7 0.3nh (or 11.1%) 100 8 16 40 60 6000 0.1 500 3.3 0.3nh (or 9.1%) 100 9 15 42 60 5500 0.12 500 3.9 5% 100 9 12 42 62 5500 0.15 450 4.7 5% 100 9 16 45 65 4800 0.17 450 5.6 5% 100 9 15 38 52 4600 0.18 430 6.8 5% 100 9 19 50 70 3550 0.2 430 8.2 5% 100 9 15 38 48 3500 0.28 400 10 5% 100 10 18 45 58 2800 0.32 400 12 5% 100 10 17 42 58 2800 0.35 400 15 5% 100 10 17 40 50 2500 0.41 350 18 5% 100 10 15 38 40 2300 0.45 350 22 5% 100 10 16 45 C 2000 0.5 300 27 5% 100 10 18 45 C 2000 0.55 300 33 5% 100 10 16 40 C 1800 0.6 300 39 5% 100 11 17 40 C 1800 0.8 300 47 5% 100 11 17 45 C 1800 0.95 250 56 5% 100 12 17 38 C 1800 1.2 250 68 5% 100 12 18 35 C 1500 1.3 250 82 5% 100 12 18 35 C 1500 1.5 250 100 5% 100 12 17 30 C 1300 1.8 200 .016 .008 [0.4 0.2] [numbers in brackets indicate millimeters] .031 .006 [0.8 0.15] .031 .006 [0.8 0.15] .063 .006 [1.6 0.15] .016 .008 [0.4 0.2] .035 .004 [0.9 0.1] .032 .004 [0.8 0.1] .091 .012 [2.3 0.3] recommended pad layout imc-0603 model 10nh inductance value 5%* inductance tolerance
|
